EasyManua.ls Logo

Ecolab Hybrid Compact/Pegasus SD21 User Manual

Ecolab Hybrid Compact/Pegasus SD21
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hybrid Compact / Pegasus
SD21, SD22.
Directions for use
Gebrauchsanweisung
Mode d’emploi
Instrucciones de uso

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ecolab Hybrid Compact/Pegasus SD21 and is the answer not in the manual?

Ecolab Hybrid Compact/Pegasus SD21 Specifications

General IconGeneral
BrandEcolab
ModelHybrid Compact/Pegasus SD21
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Summary

Symbols used in this document

General information

3.1. Identification Plate

Details about the unit's identification plate, including model, serial number, and specifications.

3.2. Supplier

Information about the manufacturer and supplier, Nilfisk FOOD.

3.3. Specifications

Technical data for water, compressed air, nozzles, and general unit parameters.

Overview and Use

System Safety

5.1. Closing valve for water supply

Instructions for isolating the unit from the water supply using a closing valve.

5.2. Closing valve for air supply

Recommendation for installing a valve to disconnect air supply and prevent backflow.

5.3. Anticipated failures

Discusses potential failures like bursted air tubes and breakdown of non-return valves.

5.4. Rest Risk

Details risks associated with improper use, damaged units, and unintended use.

Installation

6.1. Noise

Specifies the noise level according to ISO 11202, below 70 dB.

6.2. Directions for Mounting

Guidelines for mounting the unit in frost-free rooms and on suitable walls.

6.3. Transportation

Recommendations for secure transportation and handling of the unit, especially in cold temperatures.

6.4. Vibrations

Mentions hand-arm vibrations according to ISO 5349-1.

6.5. Water Connection

Instructions for connecting the water supply, including pipe rinsing and valve requirements.

6.6. Air Connection

Requirements for air supply and system rinsing before connecting the unit.

6.7. Hose Connection

Information on connecting the spray gun/outlet valve hose and recommended hose length.

Operation procedures

7.1. Start up

Steps for starting the unit, including checking supplies and selecting functions.

7.2. Maintenance, trouble shooting and Service

Instructions for maintenance, troubleshooting, and contact information for service.

Operation

8.1. Before Operation

Checks and preparations required before operating the unit, including wall mounting considerations.

8.2. Start/Stop (change, rinse, foam, des)

Procedures for starting and stopping the unit, including selecting different functions.

Maintenance, Trouble shooting, Service

9.1. Preventive maintenance

Emphasizes the need for annual maintenance by authorized service engineers.

9.2. Rinsing the chemical supply/injector system

Detailed steps for rinsing chemical supply lines after use or changing products.

9.3. Deliming

Procedure for deliming the unit based on water hardness, including disassembly and soaking.

9.4. Coupling

Recommendation for regular lubrication of coupling parts and replacement of packings.

9.5. Internal cleaning of the unit

Suggestion to clean the unit's interior at least once a week.

9.6. Trouble Shooting and Remedy

A table listing common faults, their causes, and recommended remedies.

9.7. Service address

Directs users to the back cover for service contact information.

Tools

End of Use

11.1. Dismounting

Instructions for safely removing the unit from the wall by closing supply valves.

11.2. Disposal

Guidelines for disposing of the unit and its electronic components responsibly.

Related product manuals