Ecolink firefighter - Z-Wave Plus Specific Information; Device Classes; Command Classes

© 2016 Ecolink Intelligent Technology Inc. PN FF-ZWAVE5-ECO
Z-Wave Plus Specific Information
Z-Wave Plus is a wireless mesh network and data protocol that allows devices from many different manufacturers to
interoperate. This device implements Z-Wave Plus functionality, Network Wide Inclusion, and Explorer frames. This
device is asleep most of the time but can respond to queries on a Wake Up Notification; however for test purposes,
the device will stay awake while tampered for testing Z-Wave Plus command class functionality. The following
information is intended for software engineers working on Z-Wave Plus controllers and home automation enthusiasts to
integrate the Z-Wave Plus FireFighter™ into their system.
Device Classes
Generic Device Class
GENERIC_TYPE_SENSOR_
NOTIFICATION
Specific Device Class
SPECIFIC_TYPE_NOTIFICAT
ION_SENSOR
Command Classes
COMMAND_CLASS_ZWAVEPLUS_INFO
v2
COMMAND_CLASS_VERSION
v2
COMMAND_CLASS_MANUFACTURER_SPECIFIC
v2
COMMAND_CLASS_DEVICE_RESET_LOCALLY
v1
COMMAND_CLASS_POWERLEVEL
v1
COMMAND_CLASS_BATTERY
v1
COMMAND_CLASS_SENSOR_MULTILEVEL
v7
COMMAND_CLASS_NOTIFICATION_V5
v5
COMMAND_CLASS_ASSOCIATION
v2
COMMAND_CLASS_ASSOCIATION_GRP_INFO
v1
COMMAND_CLASS_WAKE_UP
v2
COMMAND_CLASS_FIRMWARE_UPDATE_MD
v2
Manufacturer ID
MFG_ID_ECOLINK ( 0x014A )
Product Type
0x05
Product ID
0x0F