EasyManua.ls Logo

ECOMAT 2000 CLASSIC PLUS - Technical Specifications; Safety Instructions

ECOMAT 2000 CLASSIC PLUS
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ECOMAT2000 | 21
Technical specications
Electrical connection:
Voltage: 230 VAC 50/60 Hz
Power consumption: 2 / 4 / 6-10 A = electrical fuse
Power output in watts: 450 – 750 – 1500/1800 W (without lter)
Connection: Germany – Schuko-Plug with ground contact / only connect grounded
Switzerland – Socket type 12 (with ground pin)
Protection class 1
Device dimensions: 195 mm x 145 mm x 140 mm (height x width x depth)
The values for power consumption refer to ongoing operation. When the device is switched on, the
power consumption may be higher for a short time.
Some important notes for operation with…
power generator
Minimum power: min. 1200 W continuous power
Inverter
Inverter type: Sinus !!!
Power: min. 1200 W at 450 W Preset
Voltage: 220-230 VAC 50/60 Hz
Conformity
The device is lead and mercury free and conforms to the RoHS directives.
Safety instructions
To ensure safe operation of this device, please read all the following safety instructions carefully before
putting it into operation.
Warning – Do not cover !
To prevent the heater from overheating, the heater must not be covered.
This device is not intended to be operated or used by persons (including children) with limited physical,
sensory or mental abilities or lack of experience and/or lack of knowledge, unless they are instructed
by someone responsible for their safety or unless they are supervised by a person responsible for their
safety or have received instructions from them on how to use the device and they have understood the
resulting dangers.
Children should generally be supervised to ensure they do not play with the device.
EN

Related product manuals