To Next PageTo Next PageWhy does my Ecomiser SU-01 run so long?
If your Ecomiser Dishwasher runs longer than expected, it might be because the incoming water temperature is too low. Specifically, if the water is below 59°F/15°C (SU02) or 140°F/60°C (SU01), the machine will extend its cycle to heat the water to the correct temperature as programmed.
How to improve washing performance of my Ecomiser Dishwasher?
If your Ecomiser Dishwasher isn't washing dishes properly, several factors could be at play. Start by checking the impeller nozzles for clogs and cleaning them if necessary. Avoid overloading the dishwasher or placing dishes too close together. Make sure you have enough detergent, and always rinse off any dried food bits from the dishware before loading them into the machine.
Why is my Ecomiser SU-01 Dishwasher making so much noise?
If your Ecomiser Dishwasher is making excessive noise, check if the machine is level with the ground and adjust if necessary. Ensure the spray arm isn't hitting any plates during operation. Also, verify that the detergent and rinse aid containers are adequately filled.
What to do if my Ecomiser SU-01 Dishwasher has no drain?
If your Ecomiser Dishwasher isn't draining properly, start by checking the drain hose to ensure it's not bent or kinked. Also, verify that the drain is installed at a level lower than the water level inside the dishwasher.
Why is my Ecomiser SU-01 rinsing poorly?
If the rinsing performance of your Ecomiser Dishwasher is poor, leaving stains or a slippery feel on dishware, or if drying performance is lacking, check the water temperature and the amount of rinse detergent being used.
What to do if my Ecomiser SU-01 Dishwasher power is not coming on?
If your Ecomiser Dishwasher isn't turning on, first, make sure the breaker is on. Second, check that you have pressed the power button.
General| Brand | Ecomiser |
|---|---|
| Model | SU-01 |
| Category | Dishwasher |
| Language | English |
Essential safety rules for operating the dishwasher, covering general usage and warnings.
Details on electrical requirements, motors, heaters, and cycle times.
Illustrates electrical connection and grounding for the machines.
Shows fresh water and drain line connections for the machines.
Proper grounding procedures for machine safety.
Critical water supply pressure and temperature guidelines for optimal performance.
Explanation of specific error codes like ER1, EF1, and Ed1.
Causes and solutions for poor washing and drying results.
Advice on detergent, water, drain, fill, and start problems.
A table listing common issues, checks, and corrective actions.
