Econ 3300 Series - Option Pcb Adjustment

Installation and Operating manual
Econ
®
Series 3300 Smart Valve Positioner www.eriks.com www.eriks.com
19
5.3 Option PCB Adjustment
By adding option sub-PCB, the positioner can have options.
There are 3 types of sub-PCB’s:
- HART
®
Protocol (HART) only
- Position Transmitter (PTM) only
- Position Transmitter (PTM) and HART
®
Protocol (HART)
HART only PTM only PTM + HART
Installation Steps
1. Open the cover and remove the main PCB from the positioner.
2. Mount support PCB and plug sub-PCB into main PCB connector.
.
** Option Jumper must be removed, when HART
®
option included sub-PCB is being mounted.
Option Jumper