eControls RT2 - Page 4

HOMEOWNER - TIMER CONTROL
Change the Preset WHF Timer
4)
The preset WHF Timer can be set from 1 to 12 hours
and can only be set when EconoCool is Off as shown.
Press here to
change the preset
WHF Timer.
Link
Menu
ed
Econo
Cooling
OFF
Press the UP key to
increase the hours or press
the DOWN key to decrease
the hours. Then press
ENTER to save.
End the WHF Timer
2)
The WHF Timer can be terminated and the WHF turned
off anytime.
Press the ECONO COOLING
key to turn the WHF Off.
Link
Menu
ed
Econo
Cooling
On
Adjust the WHF Timer
3)
The Timer can be adjusted during WHF operation.
Use the UP key to increase the time
remaining or the DOWN key to decrease
the time remaining then press ENTER.
Link
Menu
ed
Econo
Cooling
On
Link
Menu
ed
Econo
Cooling
On
Time adjusts in 1
hour increments.
Link
Menu
ed
Econo
Cooling
Off should be displayed. If not, press
the ECONO COOLING key to turn
the WHF Off.
OFF
Enter
Link
Menu
ed
Econo
Cooling
OFF
Off will be
displayed when
the WHF is Off.
Enter
Start the WHF Timer
End the WHF Timer
Change the Preset WHF Timer
1)
2)
4)
Adjust the WHF Timer
3)
When Econo Cooling is turned On, the WHF will operate
for the preset time period.
Press the ECONO
COOLING key to turn
the WHF On and start
the Timer. On will blink.
The remaining
time is displayed.
Link
Link
Menu
Menu
ed
ed
Econo
Econo
Cooling
Cooling
On
Start the WHF Timer
1)
OFF
4
i
Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF
Owners manual for more information. Your A/C should be off during WHF operation.
In the morning and/or before operating your A/C, make sure the RT2 control is set to
Econo Cooling OFF. If operating your A/C, make sure windows are closed.