User & Installer Manual
Model RT2
Wireless WHF Control
Smart
WHF Controls
Rev Nov 2018
The RT2 is a wireless whole house fan control that
can be placed on a night table, installed on a wall
or used anywhere in the home to control the Whole
House Fan using temperature control for improved
comfort and energy efficiency or a built-in 1 to 8-
hour timer. The fan speed can be set from the
remote.
Or uses the built-in 1 to 8-hour timer.
Wireless range is 125’ in a home or building.
Controls the whole house fan wirelessly from
anywhere in the home.
Uses temperature control of the WHF to improve
comfort and energy efficiency.
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
Displays the indoor temperature.
Displays the outdoor
temperature when an outdoor
temperature sensor is installed.
Displays the WHF speed.
Indicates the RT2 is linked to
the RM2 receiving module.
MENU Key accesses
user options such as
Temperature or Timer Control.
Slide battery cover off to replace
the two AA batteries.
Use this key to turn WHF cooling
On or Off.
Displays the temperature setting for
WHF cooling.
Use the Up/Down keys to change
temperature setting for WHF cooling.
eControlseControls
Model RT2
Wireless WHF Control
Pat. Pend.
Publish as RGB, Apply ICC
To Next Page
Need help?
General
