WHF
Smart
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
WHF
Smart
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
Homeowner and Installer Manual
Model RTK, Wireless WHF Control Kit
For 1, 2 or 3-Speed PSC or ECM Fans
Rev D Apr 2019
The RT2 is a wireless whole house fan (WHF) control
that can be placed on a night table or used anywhere
in the home to control the Whole House Fan using
temperature control for improved comfort and energy
efficiency or a built-in 1 to 12-hour timer. The fan speed
can be set from the remote. The RT2 has a wireless
range of 125 feet in a home or building.
Pat. Pending
Made in USA
QUICK START FOR HOMEOWNERS
The RT2 wireless WHF control is factory set to control your WHF using Temperature, just like your thermostat, and
improves your comfort and energy savings. Simply touch the Econo Cooling key to display ON, then set the Set To
o
temperature to your desired Indoor temperature. The WHF will turn ON when the Indoor temperature rises 1 above
o
the Set To temperature and turn OFF when the Indoor temperature drops 1 below the Set To temperature. The
following morning or when WHF operation is no longer desired, touch the Econo Cooling key to display OFF. As a
precaution, the RT2 control includes a built-in Safety Timer that will turn the WHF OFF after 8 hours of operation.
Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF Owners manual for
more information. Your A/C should be off during WHF operation.
i
Operating your WHF using Temperature Control (See pages 2 and 3 for more information).
In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF.
If operating your A/C, make sure windows are closed.
Operating your WHF using Timer Control (See pages 2 and 4 for selecting and using Timer Operation)
Displays the indoor temperature.
Displays the outdoor
temperature when an outdoor
temperature sensor is installed.
Displays the WHF speed.
Indicates the RT2 is linked to
the RM2 receiving module.
MENU Key accesses
user options such as
Temperature or Timer Control.
Slide battery cover off to replace
the two AA batteries.
Use this key to turn WHF cooling
On or Off.
Displays the temperature setting for
WHF cooling.
Use the Up/Down keys to change
temperature setting or timer setting
in WHF cooling.
For more information on using the RT2, visit the
“eControls WHF Channel”, RT2 Homeowner Video.
Model RM2
WHF Radio Module
ODT
ODT
Laguna Hills, CA
eControlsUSA.com
WHF
Smart
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
WHF
Smart
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
WHF
Smart
C o n t r o l
To Next Page
Need help?
General
