HOMEOWNER - WHF OPERATION
For single speed WHFs, the fan speed will be displayed
as Hi and cannot be adjusted. For 2, 3 or variable speed
WHFs, the speed can be adjusted by pressing the Fan
Speed and using the UP and DOWN Keys.
Changing Variable Speed WHFs
5
Changing 2 or 3-Speed WHFs
Press here to change
the WHF speed.
Use the UP and DOWN keys to
select the fan speed then press
ENTER.
Medium speed (Int)
High speed (Hi)
Low speed (Lo)
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
Link
Menu
ed
Econo
Cooling
ON
Press here to change
the WHF speed.
Use the UP key to increase the
WHF speed or the DOWN key to
decrease the WHF speed. Adjusts
in 5% increments. Press ENTER.
Outdoors
Link
Menu
ed
Set To
Cool
Indoors
Econo
Cooling
ON
o
F
Link
Menu
ed
Econo
Cooling
ON
Change the Fan Speed
Enter
Enter
Two AA Alkaline batteries are supplied with the RT2
Remote Control. Expected battery life is 1 to 2 years.
The RT2 backlight will dim or go off when it’s time to
change the batteries.
Although the batteries may be replaced with Alkaline
batteries, it is highly recommended that Lithium batteries
be used for a much longer battery life than Alkaline
batteries.
Large retail chains, such as Target and Walmart, carry
Energizer Ultimate Lithium AA batteries.
Changing Batteries
Slide the battery cover down.
Place the batteries in the RT2,
making sure the polarity is correct.
Slide the battery cover up. The
RT2 is now ready for operation.
If the RT2 is dropped or batteries are removed, there is a
built-in safety feature that will automatically turn the fan
off after 15 minutes without communication from the RT2.
Loss of Communication
The RT2 and RM2 in this kit are uniquely addressed and
only work with each other. If you need a replacement
RT2 remote or RM2 radio module, please contact us at
949-916-6701.
Replacement Units
Homeowner Help
To Next Page
Loading...
Need help?
General