34 of 42
12. Maintenance
12.1 Cleaning the X62
To keep your X62 in good condition, clean it after each use. The X62 can be washed with a shower
hose or garden hose with water pressure less than 1MPa (or 145PSI) to flush the mudguards. Pressure
washing or soaking in water is not advised as this will cause serious damage to the X62.
Dry the vehicle after hosing, and place in good ventilation so that the metal parts do not rust.
For difficult stains on the plastic, a small amount of toothpaste applied to a soft cloth can be used.
Store the X62 in a cool, dry place. Exposure to sun, and extreme heat and cold will accelerate the aging
process of the X62.
WARNING: When cleaning with water, ensure that the vehicle is powered off, and that the
charging cable is unplugged, and the cover to the charging port is closed.
To Next Page
Loading...