Need help?Do you have a question about the Ecotec Access and is the answer not in the manual?
General| Brand | Ecotec |
|---|---|
| Model | Access |
| Category | Battery Charger |
| Language | English |
Details on the initial AC input source connection and branch circuit protection.
Overview of the charger control panel and display for configuration.
Steps for properly connecting the battery to the charger for charging.
Procedure for safely disconnecting the battery from the charger.
Accessing the charger's main menu and logging in with a password.
Navigating and understanding the charger's service menu options.
Viewing serial numbers and firmware versions of the charger.
Setting up battery type, AH size, voltage, and other charging parameters.
Selecting the appropriate charging curve for different battery types.
Setting the battery capacity rating in Ampere-hours (AH).
Configuring the number of battery cells for charging.
Setting cable drop compensation level for accurate charging.
Defining minimum vehicle current draw for hardwired systems.
Setting daily time periods when charging is not allowed.
Enabling a 'topping off' charge for regularly scheduled idle periods.
Configuring equalize charging based on cyclic or weekday criteria.
Configuring charger for AGV systems, Arc-Free Disconnect, and valve control.
Programming the function button for custom application requirements.
Programming the charger's date and time parameters.
Adjusting display contrast and backlight intensity.
Configuring and managing radio functions for network communication.
Displaying network information such as Charger ID and signal strength.
Initiating or exiting a charger network connection.
Information regarding CAN functionality, not in standard software.
Calibrating charger output voltage and current readings.
Resetting charger configuration to factory default settings.
Advanced configuration of charger settings by service personnel.
Forcing the charger to start, for use by qualified service personnel.
Viewing an instant snapshot of logged operational data.
Assigning power group numbers and power levels.
Routine monthly checks and cleaning for charger upkeep.
Procedures for diagnosing and resolving charger issues.
Initial checks to perform when experiencing battery charging problems.
Conditions under which the charger will automatically shut off.
How to identify and interpret error messages displayed by the charger.
Table of alarm codes, texts, and their corresponding descriptions.
Description of the CFLA-01 charging curve for lead-acid batteries.
Description of the CIMX-01 charging curve for lead-acid batteries.
Description of the OP25-01 opportunity charging curve.
Description of the OP30-01 opportunity charging curve.
Description of the OP35-01 opportunity charging curve.
Description of the OP40-01 opportunity charging curve.
Step-by-step guide to setting up the Best Battery Choice feature.
Procedure to disconnect a charger from a previous network connection.
Steps to enable the radio function for network connectivity.
Process for joining an existing charger network, requiring another charger.
Confirming BMU/Dual source and logging into the charger with password.
Setting source to BMU/Dual and adjusting display backlight settings.
Enabling join, connecting the BMU-installed battery, and verifying ID.
Warranty terms for Ecotec Access Chargers in North America.
Details on warranted products, parts, and their respective coverage periods.
Defines when the warranty period begins, linked to installation or shipment.
Ecotec's liability limitations regarding repair, replacement, and damages.
Conditions under which using a defective product may void the warranty.
To Next Page