5 Scroll to Backlight and press OK
6 Using arrow keys set Backlight to 60 and press OK
7 Press ESC
8 Scroll to Radio menu
9 Scroll to Join Enable and press OK
As quickly as possible go to the new charger and follow below.
1 If not still in Radio menu, navigate menus as described
above to get to the Radio menu.
2 Scroll to Join Network and press OK
3 If prompted, enter Password 2451
4 If the message Success is displayed the charger has
joined the network and you are done.
5 If the message Failed is displayed go back to “**” and
repeat all steps as quickly as possible to avoid any menu
timeouts.
To Next Page
Loading...