2 3
Inside the Box
POWER SUPPLY POWER CORD FOAM GUARD
MOUNTING TABS (X4)
DRIVER
VELCRO STRIPS (X2)
DRY SIDE
ZIP TIES (X4)
RUBBER SPACERWET SIDE
Your VorTech Propeller Pump is designed to
operate optimally with little attention after initial
setup; however, due to the harsh conditions of a
saltwater aquarium and resulting buildup of algae
and other organic matter, it is advisable to clean your
wet side to ensure the longevity of your purchase.
EcoTech recommends doing a wet side cleaning
every 6 to 8 weeks or as necessary.
This can be accomplished by disassembling the
pump's wet side and gently brushing with a soft
brush under running water. If there is calcium
buildup, it may be necessary to soak these
parts in a mild acid solution such as vinegar.
Do not use strong acids, because these may
damage the components.
After cleaning, reassemble the wet side.
WET SIDE
DISASSEMBLY
WATCH THE VIDEO:
ecote.ch/mp10qddisassemble
Maintenance
To Next Page
Loading...
