How to fix ECOVACS DEEBOT 601 not charging?
If your ECOVACS Vacuum Cleaner isn't charging, first ensure it's switched ON. Then, check that the robot's Charging Contacts are correctly connected to the Charging Dock Pins. If the battery is completely discharged, try re-activating it by switching ON the DEEBOT, placing it on the Charging Dock manually for 3 minutes, removing it, and repeating this process 3 times before charging normally.
Why is my ECOVACS DEEBOT 601 not charging?
Your ECOVACS DEEBOT might not be charging for several reasons: * The DEEBOT is not switched ON. Solution: Switch ON DEEBOT. * The DEEBOT has not connected to the Charging Dock. Solution: Be sure that the robot’s Charging Contacts have connected to the Charging Dock Pins. * The battery is completely discharged. Solution: Re-activate the battery. Switch ON DEEBOT. Place DEEBOT on the Charging Dock by hand, remove after charging for 3 minutes, repeat 3 times; then charge normally.
Why ECOVACS DEEBOT 601 does not clean automatically at the scheduled time?
If your ECOVACS Vacuum Cleaner isn't cleaning automatically at the scheduled time, there might be several reasons. First, the Time Scheduling function may be cancelled, so use the ECOVACS App to program DEEBOT to clean at specific times. Second, ensure that DEEBOT is switched ON. Also, keep DEEBOT switched ON and connected to the Charging Dock to maintain a full battery. Finally, check if the robot’s Suction Intake is blocked or if there is debris stuck in its components. If so, power OFF DEEBOT, clean the Dust Bin, invert the robot, and clean the robot’s Suction Intake, Side Brushes, and the Main Brush.
What to do if ECOVACS DEEBOT 601 Vacuum Cleaner is not able to connect to the home Wi-Fi network?
If your ECOVACS Vacuum Cleaner is not able to connect to the home Wi-Fi network, ensure that you have entered the correct home Wi-Fi username and password. Also, make sure the DEEBOT is within range of your home Wi-Fi signal. If you have already checked the Wi-Fi connection, turn ON the Power Switch and press the RESET Button for 3 seconds. The DEEBOT is ready for network setup when it plays a musical tune and its Wi-Fi Indicator light flashes slowly. Finally, make sure that your smartphone’s operating system is updated. The ECOVACS App runs on iOS 9.0 and above, Android 4.0 and above.
Why ECOVACS DEEBOT 601 Vacuum Cleaner returns to the Charging Dock before it has finished cleaning?
If your ECOVACS Vacuum Cleaner returns to the Charging Dock before it has finished cleaning, it's likely normal behavior. When the battery gets low, DEEBOT automatically switches to Return to Charger Mode to recharge. Also, working time can vary depending on the floor surface, room complexity, and the Cleaning Mode selected.
What to do if ECOVACS Vacuum Cleaner gets stuck while working and stops?
If your ECOVACS Vacuum Cleaner gets stuck while working and stops, it may be tangled with something on the floor, such as electrical wires, curtains, or carpet fringing. DEEBOT will attempt to free itself. If it cannot, manually remove the obstacles and restart it.
What to do if my ECOVACS DEEBOT 601 does not clean automatically at the scheduled time?
If your ECOVACS DEEBOT isn't cleaning automatically at the scheduled time, consider the following: * The Time Scheduling function may be cancelled. To resolve this, program DEEBOT to clean at specific times using the ECOVACS App. * The DEEBOT might be switched OFF. If so, switch it ON. * The robot’s battery may be low. Keep DEEBOT switched ON and connected to the Charging Dock to ensure it has a full battery. * The robot’s Suction Intake could be blocked, or there might be debris stuck in its components. Power OFF DEEBOT, clean the Dust Bin and invert the robot. Clean the robot’s Suction Intake, Side Brushes and the Main Brush.
General| Shape | Round |
|---|---|
| Product color | Black |
| Built-in display | No |
| Remotely operated | Yes |
| Dust container type | Dust bag |
| Noise level | 64 dB |
| Wet mopping | - |
| Dust capacity (total) | 0.3 L |
| Dirt separating method | Filtering |
| Floor surfaces supported | Carpet, Hard floor |
| Charging time | 4 h |
| Battery capacity | 2600 mAh |
| Battery technology | Lithium |
Weight and Dimensions| Height | 79 mm |
|---|---|
| Weight | 3300 g |
| Diameter | 332 mm |
Lists all items included in the DEEBOT package for setup and operation.
Illustrates and labels the various components of the DEEBOT robot.
Provides essential pre-cleaning advice and warnings to ensure proper operation.
Details the necessary steps for preparing the DEEBOT before its first use.
Explains how to choose between AUTO and Programmed cleaning patterns.
Covers the procedures for pausing, resuming, and powering the DEEBOT on and off.
Instructions for cleaning and maintaining the dust bin and its filters.
Guide on how to clean and maintain the main brush and side brushes.
Details maintenance for other robot parts like sensors and wheels.
Provides a schedule for routine maintenance and part replacement.
To Next Page