Press the power button to turn
on. Switch ECO/MAX mode
according to floor conditions.
Tilt the angle properly.
Pull the machine backwards to start
using it. Stand the machine upright.
Tilt the angle properly.
Press the button once during
work, and the roller starts large
gear spraying water. Press this
button again, to return to the
default water volume.
Notice: The button can only be
used if the wet function on.
Before use, please make sure your
product is powered. If not, please
charge it in time (refer to and
for details), and use it after fully
charged.
EN
9
4 5
6 7
To Next Page
Loading...
