ASSEMBLY & DISASSEMBLY
Insert the handle connecting tube
into the machine component port,
and it will be installed in place when
you hear the "click".
To disassemble, insert a tool into
the disassembly hole on the back
of the body, press firmly against the
stopper, and pull the handle
upward to complete the disassem-
bly.
To disassemble the roller cover,
press the front button with your
thumb, break it up, and remove the
roller cover.
To disassemble the roller, pull up the
left roller handle with your fingers to
remove it.
Disassemble Roller Cover Disassemble Roller
White Button
Assemble Handle Disassemble Handle
EN
7
To Next Page
Loading...