To remove, hold the fuselage with one hand, grasp the dirty water tank
groove and dirty water tank release with the other hand and pull back.()
Grab the front handle and pull the tank cover out.()
Dirty Water Tank
Release
DAILY MAINTENANCE & PRODUCT CARE
Clean up the dirt in the dirty water
tank. Remove the filter from above
the dirty water tank. ()
Clean the filter and the dirty water
tank cover with clean water. Dry the
components before reassembly. ()
Align the dirty water tank back into the body of the
machine. Insert the bottom of the tank first, then pivot
the top toward the machine until it "clicks" into place.
()
EN
11
click
1 2 3
4 5 6
7
To Next Page
Loading...
