ECOWITT WH0280 - Mounting with Zip Tie; Mounting with Nail or Screw

Instruction Manual
8
1. Alarm Clock Icon
2. Current Indoor Temperature
3. RF Channels
4. Time
5. Current Indoor Humidity
6. Outdoor Reception Icon
7. Current Outdoor Temperature
2.4.2 Sensor Operation Verification
Verify the indoor and outdoor temperature match
closely with the console and sensor array in the
same location (about 2 to 3m apart). The sensors
should be within 2°F (the accuracy is ± 1°F).
Allow about 30 minutes for both sensors to
stabilize.
3. Wireless Sensor Installation
It is recommended you mount the remote sensor
in a shaded area. Direct sunlight and radiant
heat sources will result in inaccurate temperature
readings. Although the sensor is water resistant,
it is best to mount in a well-protected area, such
as under an eve.