6.
Wi-Fi Configure with Gateway
This Particle Detection Sensor doesn’t has a display func-
tion and you need to view the data on weather server htt-
ps://www.ecowitt.net or WS View Plus/ Ecowitt App aft-
er pairing this device with our the WiFi Gateway/GW11-
00 Wi-Fi Gateway or HP2551/HP3500/HP3501/WH0295
console (all sold separately).
6.1 Pair with Gateway
If the WiFi Gateway/GW1100 has been in operation, and
you have never had any WH45 sensor setup before, just
power up the sensor and the WiFi Gateway/GW1100 will
pick sensor data automatically.
If a WH45 sensor has been hooked on the WiFi
Gateway/GW1100 before, and you have a new sensor to
replace the old one, just power off the old sensor and
power on the new sensor, open the APP: WS View Plus/
Ecowitt App, tap the device and go to sensor ID page,
locate the WH45 sensor, select “Register”, then the
gateway will erase the previous registered sensor and
have the new sensor paired.
To Next Page
Loading...
