2. Power off the old sensor and power on the
new sensor.
3. Click Re-register on the Sensor ID page.
Then the new sensor will be learned and the
old sensor will be erased.
5.2 Wi-Fi Connection for the Gateway
For this part, please refer to the manual of the
GW1000/GW1100 Wi-Fi gateway.
6. View Online Data with WS View
When the Wi-Fi configuration is done (to tell
the gateway to be hooked to your Wi-Fi
network), your sensor data as well as the
sensor battery voltage information will be
displayed on WS View App at the Live Data
To Next Page
Loading...
