5. Wi-Fi Configure with gateway
If you want to view the Ultrasonic Sensor data on
your mobile application, you need to pair this device
with our GW1000 Wi-Fi Gateway or HP2550/HP2551
display console (sold separately).
5.1 Pair with gateway or display console
Please follow the tips to pair your sensor(s) with the
Wi-Fi Gateway or HP2550/HP2551 display console:
(1).Power on the gateway first (with USB connection)
or HP2550/HP2551 display console (with adaptor
connection)
(2).Power on the Ultrasonic sensor.
(3).The RF status indicator of the gateway will light
on steady, and light off once when it receives the data
from the optional sensor(s) once.
(4).If work normally, you can forward to the Wi-Fi
connection operation.
5.2 Wi-Fi Connection
For this part, please refer to the manual of the
GW1000 Wi-Fi gateway or HP2550/HP2551 Wi-Fi
Weather Station.
Any question, please contact the customer service.
To Next Page
Loading...
