cold weather climates. Please avoid alkaline
batteries, especially when internal heater is to
be activated during cold and wet weather
conditions as when heater activated, the
trapped heat inside will warm up internally,
and alkaline batteries are extremely
susceptible to leakage when temperature is
over certain limits. So Alkaline batteries are
forbidden to be used with this anemometer
when heater function is activated.
4.2 Mount ultrasonic anemometer assembly
4.2.1 Before you mount
Before installing your outdoor sensor in the permanent
location, we recommend operating the device for one
week in a temporary location with easy access. This will
allow you to check out all of the functions, ensure proper
operation and familiarize you with the device
performance.
4.2.2 Mounting
You can attach a pole(not included) to a permanent
structure and then attach the sensor package to it
(see Figure 3-12).
To Next Page
Loading...
