To achieve proper alignment, it is helpful to use a
compass (many cell phones have a compass
application).
Note:
In Southern hemisphere, it is not necessary to change
the orientation to“SOUTH”as its solar panel is a
rounded type and it is orientation free for its charging
capability.
Make sure the mounting tube for the sensor package is
installed vertically (use a level at 90-degree offsets
around the tube). Adjust the mounting pipe as
necessary. Next also make sure the mounting of the
anemometer body on the pipe is level. If it is not,
wind direction and speed readings may not operate
correctly or accurately. Adjust the mounting assembly
as necessary.
Make sure you check, and correct if necessary, the
north orientation again, as the final installation step,
and now tighten the bolts. Do not over tighten, but
make sure strong wind and/or rain cannot move the
sensor package.
8.Specification
To Next Page
Loading...
