EcoxGear EcoPebble User Manual

Turn on the device, look for the Blue LED, and search for 'ECOXGEAR' on your smart device.

Select 'ECOXGEAR' on your device to connect and play your music.

The main power switch must be ON for operation; set OFF for extended periods to save battery.

Press and hold the standby button for 3-5 seconds to turn the unit ON or OFF from standby.

The device auto-connects to the last paired device if the Main Power Switch is not turned OFF.

Press and hold the STANDBY button for 3-5 seconds to turn the unit ON/OFF.

Press once to play/pause music and answer incoming mobile calls.

Navigate tracks by pressing once; adjust volume by pressing and holding buttons.

Explanation of LED lights for Power ON, Bluetooth Paired, and Charging states.

Standby power does not operate when the Main Power Switch is OFF.

Steps to connect your ECOPEBBLE to a Bluetooth-enabled device.

How to re-enter pairing mode by turning off Bluetooth or cycling power.

Tips for switching between devices and troubleshooting connections.

Covers dimensions, weight, power, playtime, charging, frequency, and Bluetooth.

Details attachment points, optional accessories, storage temperature, and IP rating.

Essential conditions for the waterproof feature, especially the back cap.

Rules for using the speaker indoors, outdoors, and in water environments.

Important warnings regarding repairs, charging, and potential hazards.

Recommended practices for safe operation and maintenance.

Actions that could lead to damage, fire, or injury.

Instructions for maintaining the waterproof cap seal and cleaning the unit.

Proper methods for charging and caring for the built-in battery.

Details the 3-year warranty for defects in workmanship and materials.

Information on what the warranty does not cover and how to make a claim.