11
7. EcoConnect Button:
If you have purchased a second EcoBoulder+ (or one other
ECOXGEAR speaker bearing the EcoConnect symbol), press and release this button
on both speakers to link them together and play in stereo.
8. Master Volume Control: Press to adjust the speaker’s main mix volume. Press
and hold to adjust the volume continually (volume levels are 0 to 30).
9. Backlight Button: Press to turn button backlights on / off.
10. Tune Buttons: Press these buttons to tune in a radio station. To “seek” (jump
to the next available station), press and hold either button down for a few seconds
until it starts to seek a station.
11. EcoTalk: This button activates your Voice Assistant (Siri and OK Google).
12. AM/FM Presets and Equalization: Store up to 5 of your favorite AM/FM
radio stations and quickly tune to a preset radio station. Press the EQ button to
activate the Bass and Treble controls. PRESS AND HOLD the EQ button for 3
seconds to activate the Preset EQ modes.
13. LED Screen Icons:
When the battery level is
less than 20%, the first bar
will blink.
Two speakers are paired
via EcoConnect.
Indicates that the battery
level is very low.
In pairing mode, the icon will
flash. If the connection is
successful, the icon will be solid.
Indicates the battery level of
the EcoBoulder+.
Indicates the EcoBoulder+
is charging.
The EcoBoulder+ is in the
Bluetooth mode.
Indicates the speaker volume
level of EcoBoulder+. (0 to 30)
Indicates the current AM
station of the EcoBoulder+.
The EcoBoulder+ is in
AUX mode.
Indicates the microphone vol.
level of EcoBoulder+. (0 to 30)
The EcoBoulder+ is in
FM mode.
Indicates the current FM
station of the EcoBoulder+.
The EcoBoulder+ is in
AM mode.
To Next Page
Loading...
Need help?
General