ECS 915P-A User Manual

35
Using BIOS
Plug & Play Aware O/S (Yes)
This itme select which, the BIOS or the operating system, will configure all the devices in
the system. If set NO, the BIOS configures the system; set YES, the operating system
configure Plug and Play devices.
Primary Graphics Adapter (PCI-E VGA)
This itme indicates if the primary graphics adapter uses the PCI-E VGA, PCI VGA, or AGP-
E VGA.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
PCI IDE BusMaster (Disabled)
This item enables or disabled the DMA under DOS mode. We recommend you to leave this
item at the default value.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has benn
installed, Installed displays. If not, Not Installed displays.
Press <Esc> to return to the main menu setting page.
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F8:Best Performance Settings
Password Check (Setup)
This item enables users to choose the time when the system will perform password check.
Security Settings
_____________________________________________________
Supervisor Password : Not Installed
Change Supervisor Password Press Enter
Password Check Setup
BIOS Security Features
This page helps you install or change a password.
Install or Change the
password.
Help Menu
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
BIOS Security Features
Press <Esc> to return to the main menu setting page.
mnkl

ECS 915P-A Specifications

General

Brand	ECS
Model	915P-A
Category	Motherboard
Language	English