41
Using BIOS
DIMM Voltage (Disabled)
This item allows users to adjust the DIMM voltage.
CPU Voltage (Disabled)
This item allows users to adjust the CPU voltage.
Incorrectly doing overclock/overvoltage may result in damage to CPU,
chipset, or memory and reduce the useful life of these components. This
function is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results.
(Enable for AM2+ / Disable for AM2)
AMD Athlon (tm) II x2 250 Processor
This is display-only field and displays the information of the CPU installed in your
computer
.
NB CLK (2000 MHz)
This item shows the frequency of Northbridge clock.
Current CPU Frequency (3000 MHz)
This item indicates the current CPU frequency. Users can not make any change
tothis item. Please noted that the frequency will be varied with different CPU.
Current CPU Voltage (1.3250v)
This item indicates the current CPU voltage.
Current NB Frequency (2000 MHz)
This item indicates the current NB frequency.
NB Voltage (+50mV)
This item allows users to adjust the Northbridge voltage.
SB Voltage (1.20V)
This item allows users to adjust the Southbridge voltage.
DIMM Voltage Default (1.60v)
This item indicates the current NB frequency
.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
CPU/HT Reference Clock (MHz) (200)
Use this item to set the CPU/HT Reference Clock through clock gen.
HT Frequency (Auto)
This item enables users to adjust the HT frequency. The default setting is auto and we
recommend users leave the setting unchanged. Modify it at will may cause the system
to be unstable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
