27
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
IDE Master/Slave, SATA1~6
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports six SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
IDE Master
Help Item
Select the type
of the device connected
to the system.
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture’s website for updated
manual.
Date 0/01/2009
Time 00:28:50
IDE Master
Not Detected
IDE Slave Not Detected
SATA 1 Not Detected
SATA 2 Not Detected
SATA 3 Not Detected
SATA 4 Not Detected
SATA 5 Not Detected
SATA 6 Not Detected
IDE BusMaster Enabled
IDE Master
Device : Not Detected
Type Auto
LBA/Large Mode Auto
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T. Auto
32Bit Data Transfer Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized DefaultsF1:General Help
: Move
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized DefaultsF1:General Help
: Move
To Next Page
Loading...
Need help?
General
Weight and Dimensions
