39
Using BIOS
Press <Esc> to return to the main menu setting page.
Voltage Function (Disabled)
Use this item to enable or disable the Voltage Function. If enable, users can increase
the hardware voltage through BIOS settings.
AMD Phenom (tm) II X3 720 Processor Speed (2800MHz)
This is display-only field and displays the information of the CPU installed in your
computer.
Warning: Please pay attention that doing overvoltage may result in damage
to hardware.
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help Item
Press <Esc> to return to the main menu setting page.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults
or not. You select [OK], and then press <Enter>, the Setup Utility loads all default
values; or select [Cancel], and then press <Enter>, the Setup Utility does not load
default values.
Supervisor Password : Not Installed
Change Supervisor Password Press Enter
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized DefaultsF1:General Help
: Move
mnlk
NB Clk (2000MHz)
This item shows the frequency of Northbridge clock.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
