14
Caring for your Computer
To reduce the risk of electric
shock when connecting external peripherals such as
printer, communication network, antenna, LAN, etc.,.
Disconnect power from the computer by
unplugging the power cord from the AC outlet (not
by unplugging the power cord from the computer).
Be sure not to clean the computer when it is
plugged into a wall socket.
When cleaning the unit, clean only with a damp
soft cloth. Do not pour liquid onto the unit.
Do not clean while the computer is “on” or
plugged into a wall socket.
Caution students to avoid using this device under
wet conditions and also to protect the unit when
carrying under this condition.
Be sure the touch pad does not come into contact
with dirt, liquids, or grease.
Power connection must be removed before
installing signal cables, whenever it is
functionally and legally allowed.
Power cords must be reconnected only after all
signal interconnections have been completed.
To Next Page
Loading...