ECS EC10II2 - U.S. and Canada; Other Countries

21
U.S. and Canada
 The cord set must be UL/ETL-Listed and CSA-
Certified or UL/C-ETL Listed.
 The minimum specifications for the flexible cord
are (1) No. 18 AWG, (2) Type SPT-2, and (3) 2-
conductor.
 The cord set must have a rated current capacity of
at least 7A.
 The attachment plug must be NEMA 1-15P (7A,
125V) configuration.
Other Countries
 The cord set fittings must bear the certification
mark of the agency responsible for evaluation in
a specific country. Acceptable agencies are:
CCC (China)
 The flexible cord must be of a HAR (harmonized)
type HO5VV-F 3-conductor cord with a minimum
conductor size of 0.03 square inches.
 The minimum specification for the flexible cord
for Class II product are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
 The cord set must have a current capacity of at
least 10 A and a nominal voltage rating of 125 /
250 VAC.
This model is designed to use
with the following AC Adapter model only.
 Manufacturer: Shenzhen Huntkey Electric Co., Ltd.