48
dialog box. In Standby mode, hardware devices, such
as display panel and hard disk, are turned off to
conserve energy.
Hibernate Suspend
In this mode, all system data are saved in the hard
disk before powering down. When this mode is
activated, all system state and contents are saved to the
hard disk drive after a period of inactivity defined by
the user.
No power or very little power is drawn from the
battery module under this mode.
However, depending on how much RAM that has been
installed on your computer, the amount of time the
system requires to restore all its previous contents can
range from five to 20 seconds. Power
Power Button Action
Intel-powered classmate PC - Convertible power
button can be set to turn off the system or activate the
suspend mode under an operating systems
environment.
To Next Page
Loading...