69
Troubleshooting
Your computer has been fully tested and complies
with the system specifications before shipping.
However, incorrect operations and/or mishandling
may cause problems. You may also encounter simple
setup or operating problems that can solve by
considering the following suggestions. If the problem
persists, contact your dealer for service.
Check to see if the power cord is properly plugged
into the wall outlet and into the computer.
Check to see the power indicator of the computer
is on.
Check to see if your keyboard is operational by
pressing and holding any key.
Check for any incorrect or loose cable connections.
Make sure the latches on the connectors latch
securely on to the receptor end.
Be sure you have not performed an incorrect
setting on the hardware devices in the BIOS Setup
utility. A faulty setting may cause the system to
malfunction. If you are not sure of the changes
you made, try to restore all the settings to factory
defaults.
Be sure all the device drivers are installed
properly. For example, without the audio driver
To Next Page
Loading...