43
Using BIOS
PC Health Status
On motherboards that support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
Shutdown Temperature [Disabled]
Enables you to set the maximum temperature the system can reach before powering down.
Warning Temperature [Disabled]
This item allows users to manually set the warning temperature of the system.
System Component Characteristics
These fields provide you with information about the systems current operating status.
You cannot make changes to these fields.
• CPU Vcore Voltage
• Memory Voltage
• CPU Temperature
• System Temperature
• CPU FAN Speed
• SYSTEM Fan Speed
• Power Fan Speed
Shutdown Temperature [Disabled]
Warning Temperature [Disabled]
CPU Vcore Voltage
+2.5V
+3.3V
+5V
+12V
5VSB (V)
VBT (V)
CPU Temperature
System Temperature
CPU FAN Speed
System Fan Speed
Power Fan Speed
Power 20/24Pin Message [Enabled]
Item Help
Menu Level
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Power 20/24Pin Message [Enabled]
This item allows users to enable or disable the 20/24pin power cable indication message.
To Next Page
Loading...
Need help?
General
