34
Using BIOS
Small Logo (EPA) Show [Disabled]
Enables or disables the display of the EPA logo during boot.
The disk drive software monitors the internal performance of the motors, media, heads
and electronics of the drive. The host software monitors the overall reliability status of
the drive. If a device failure is predicted, the host software, through the Client WORKS
S.M.A.R.T applet, warns the user of the impending condition and advises appropriate
action to protect the data.
BIOS Rom TBL protect [Disabled]
This item enables or disables the BIOS Bootblock protect.
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave the
items on this page at their default values unless you are very familiar with the technical
specifications of your system hardware. If you change the values incorrectly, you may
introduce fatal errors or recurring instability into your system.
DRAM Configuration [Press Enter]
LDT & PCI Bus Control [Press Enter]
UMA Frame Buffer Size [32MB]
Video RAM Cacheable [Enabled]
System BIOS Cacheable [Enabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
DRAM timing and control
Press <Esc> to return to the main BIOS setting page.
DRAM Configuration
Scroll to this item and press <Enter> to view the following screen:
(Press Enter)
Timing Mode [Auto]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
DRAM Configuration
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
x
x
Memclock index value (MHz) 200MHz
CAS# latency (Tcl) 2.5
To Next Page
Loading...
Need help?
General
