EasyManua.ls Logo

ECTIVE LC Series - ECTIVE under Seat Batteries

ECTIVE LC Series
42 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 ECTIVE Lithium Batteries
ECTIVE UNDER SEAT BATTERIES
In motorhomes, saving space is an essential factor, as is weight. The Under Seat
models in the ECTIVE LC series were developed with precisely this purpose in
mind. They can be installed directly under the passenger seat in many motorhomes
and thus easily replace a previous wet, gel or AGM battery.
With an ECTIVE Under Seat battery, you can make optimal use of the space in your
motorhome and at the same time benefit from the numerous tried and tested
advantages of the LiFePO
4
batteries.
Installation Instructions
Prepare the following materials and tools for installation: cable (black and red, min.
AWG3/30mm2), cable cutter, M5 screwdriver, insulating tape.
Cut the cable according to the distance between the battery and the inverter.
Please note that the inverter should be no more than 75 cm away from the battery.
The bare ends of the cable should be at least 11 to 14 mm long.
Insert the black wire into the blue terminal, the red wire into the red terminal and
tighten the screws.
Secure the battery with a suitable adhesive or strap.
Ensure that the inverter is switched off. Connect the black cable securely to the
negative terminal of the inverter and the other end of the cable to the negative
11 - 14 mm