ECTIVE Lithium Batteries 37
Calibrating with an empty battery
■ First discharge the battery completely.
■ Press the button
for three seconds to set the stored capacity to zero.
■ Now fully charge the battery.
Calibrating with a full battery
■ Fully charge the battery.
■ In the settings menu, set the capacity to the correct capacity of your battery
according to the steps described above.
The battery monitor will now correctly display the capacity of the battery.
However, if you notice major discrepancies between the actual values and the
information shown on the display when charging or discharging, please check
the connections.
Tip: The battery monitor built into the ECTIVE LC Slim BT is also available
separately as the ECTIVE BM X! This means you can also upgrade other batteries
with this advanced display, including Bluetooth function.
The detailed operating instructions for the ECTIVE BM X therefore also apply to
the battery monitor installed in the LC Slim BT and LC Under Seat BT.
You can find the ECTIVE BM X battery monitor as a stand-alone product here.
App "ECTIVE BM X":
To Next Page
Loading...