edelkrone FLEXTILT HEAD 3D - User Manual

USER’S MANUAL
FLEXTILT HEAD 3D
Before operating your edelkrone,
please watch the user’s manual video from the link below
http://edel.kr/fh3d

Summary

FlexTILT HEAD 3 D User Manual Introduction

Whats in the Box

Printed Parts Identification

Assembly of A1 & A2

Assembly of A3

General Assembly Steps

Assembly of M5

Assembly of A4

Assembly of A5

Assembly of A6 - Part 1

Assembly of A6 - Part 2

Assembly Step 11

Assembly Step 12

Assembly Step 13

Adjusting Tension

Mounting FlexTILT HEAD 3 D - Method 1

Mounting FlexTILT HEAD 3 D - Method 2

Mounting the Camera

Unfold Head to Access Wheel

Unfold the FlexTILT Head to access the mounting wheel for camera attachment.

Attach Camera via Mounting Wheel

Attach your camera by securely turning the mounting wheel.

Height Adjustment Guidance

While adjusting height, adjust one point at a time for stability.

Disclaimer

edelkrone FLEXTILT HEAD 3D Specifications

General

Load Capacity	3 kg
Pan Range	360°
Material	Aluminum
Mounting Options	1/4"-20 and 3/8"-16 threads
Tilt Range	90°