Need help?Do you have a question about the Eden World Tour 1205 and is the answer not in the manual?
Congratulates the user and provides an overview of the WT1205 amplifier's features and capabilities.
Warns about permanent hearing damage from high volume levels and recommends consulting an audiologist.
Details Input Jacks, Mute, Channel Select, Gain, Turbo Boost, and indicator lights on the front panel.
Explains Compressor Controls, their function, and how to disable them.
Details the Enhance control and the Tone Control Sections for Channel One and Channel Two.
Explains the Dynamic Boost feature for adjusting frequencies based on loudness.
Describes AUX In, D.I. Controls, Balance, Master Level, and D.I. Select for connectivity and routing.
Explains the Bridge Mono Select switch for combining amplifiers.
Details power indicators, mains switch, and the fuse holder for power connection.
Lists power output ratings in Dual Mono/Stereo and Mono Bridge modes, including headroom.
Covers fuse requirements for different regions and voltage configurations.
Details Speaker Outputs (1/4" and NL-4) and the separate Bridge Mono Output for connecting speakers.
Describes the Headphone Output/Slave Output function for silent practice or powering other amplifiers.
Explains the Footswitch Jack and the Tuner Out Jack for connecting external devices.
Details Stereo Aux. Inputs for external sources and the balanced XLR Recording Out.
Describes the Ground Lift Switch and Mono Effects Sends and Returns for signal processing.
Explains how the footswitch connects and overrides front panel controls.
Details the Mute and Channel Switching functions controlled by the footswitch.
Describes Footswitch controls for Turbo Boost and Enhance Bypass, affecting both channels.
Advises on placement, ventilation, electrical needs (20 Amps), and correct cabling.
Provides critical guidance on connecting speakers for separate and Bridge Mono modes to prevent damage.
Outlines the step-by-step process for initial amplifier setup before powering on.
Details setting controls to minimum/flat and plugging in the power cord for safe operation.
Guides on setting Input Gain to avoid clipping and adjusting Master Volume for a comfortable listening level.
Explains how to engage and adjust the compressor threshold for desired dynamic range.
Guides on setting EQ generally flat, using Enhance, and adjusting Tone Controls.
Advises on EQ usage, avoiding excessive boosting, and correcting clipping.
Guides on adjusting Bass, Treble, and Midrange controls for desired tone.
Encourages experimenting with Midrange controls to understand their tonal impact.
Guides on engaging Dynamic Boost and making final adjustments to EQ and compression.
Explains clipping and how to interpret Limit light flashing for amp status.
Discusses frequency masking from other instruments and enhancement from room acoustics.
Provides guidance on selecting speaker cabinets (Ohms) to match the amplifier's needs.
Explains using the headphone jack as a line driver for connecting to external power amplifiers.
Explains safe use with headphones only for practice or as a preamplifier.
Advises on cleaning connection points and removing dust from ventilation openings.
Warns about amplifier damage if smoke is released and advises immediate shutdown.
Invites users to visit the website for articles, FAQs, and the online community forum.
Outlines procedures for contacting customer service, obtaining an RMA, and returning units for service.
To Next Page
General
