Need help?Do you have a question about the Eden WT800 and is the answer not in the manual?
General| Power Output | 800W @ 4Ω |
|---|---|
| Enhance Control | Yes |
| Compressor | Yes |
| Effects Loop | Yes |
| Type | Bass Amplifier |
| DI Output | Yes |
| Frequency Response | 10Hz - 15kHz |
| Inputs | 1 x 1/4" instrument input |
| EQ | 5-band semi-parametric |
| Outputs | Speakon and 1/4" outputs |
Input Jack and Input Pad for signal connection and level adjustment.
Gain Control and Set Level Indicator for proper gain staging.
Enhance, Bass, Semi-Parametric, and Treble controls for tone adjustment.
EQ Clip Light, Compressor Defeat Switch, and Compressor Indicator Light.
Master Level Control for output volume and Headphone Jack for monitoring.
Bi-Amp and Mono Bridge switches with critical operational warnings.
Controls for balancing amplifier outputs and setting crossover points.
Indicators for power limiting circuit activity and power supply status.
Powers the unit ON/OFF and indicates AC power presence.
Specifications for RMS output per channel and in Bridge Mode.
Left/High Amp Output and Right/Low Amp Output connectors.
Single NL-4 connector for Bridge Mono operation.
Fuse replacement location, types, and voltage configuration.
Balanced XLR output for sending signal to mixers.
D.I. Level control and Ground Lift Switch for noise reduction.
Mono Pre-EQ and Stereo Post-EQ effects send/return jacks.
Tuner Out Jack and Aux. Input for external connections.
Speaker outputs with jack/Speakon connectors.
Thermostatically controlled fan and thermal safety features.
Proper placement, ventilation, and thermal shutdown procedures.
Requirements for AC power connection and usage.
Guidelines for using instrument and speaker cables correctly.
Instructions for connecting speakers and setting switches in Dual Mono mode.
Instructions for connecting speakers and engaging Bridge Mono mode.
Instructions for connecting speakers and engaging Bi-Amp mode.
Steps for safely powering on the amplifier and setting initial controls.
Guide to setting Input Gain and Master Volume for optimal signal.
How to engage and adjust the compressor for desired effect.
How to use the Enhance control for tone shaping.
Guidance on using EQ controls and avoiding clipping.
Adjusting Bass and Treble controls for desired tone.
Techniques for adjusting semi-parametric frequency and level.
Understanding and avoiding preamp and EQ clipping.
Explains frequency masking and enhancement issues in live settings.
Concluding remark encouraging use of the amplifier.
Advice on selecting compatible speaker cabinets for the amplifier.
Using the headphone jack for connecting to other amplifiers.
Using the amp for practice with headphones or as a preamp.
Cleaning connection points for optimal performance and tone.
Cleaning ventilation openings to prevent overheating and ensure proper function.
Critical warning about smoke indicating severe amplifier damage.
Information on website, FAQ, and user forum for further details.
Procedure for obtaining service and Return Merchandise Authorization (RMA).
To Next Page