Need help?Do you have a question about the Eden WT-300 Traveler and is the answer not in the manual?
Regulates the preamplifier's first gain stage and signal level.
Three controls for boosting/cutting specific frequencies with overlapping ranges.
Adjusts the overall system output volume.
Two 1/4 inch jacks for speaker connection, wired in parallel.
Guidelines for placement and ventilation to prevent overheating.
Requires a 10 Amp dedicated AC circuit for proper operation.
Guide to setting gain using compressor and EQ clip indicators.
Procedure for replacing the vacuum tube, safety precautions included.
To Next Page
General