EDGE-1830 / EDGE-2440 / EDGE-3240 / EDGE-2460 / EDGE-3260 / EDGE-3860 / EDGE-4460 / EDGE-3270
Installation and Operating Manual
Original Instruction Manual iii Rev 1.0, July 2019
IMPORTANT
• Retain all shipping materials until you are certain that the oven has not been
damaged (either externally or internally) during shipment. Thoroughly inspect
the oven on receipt for both external and internal damage. It is solely the
customer's responsibility to report any shipping damage to the freight
company.
NOTICE
• Oven installation, including electrical and natural gas connections, oven
placement, and ventilation must comply with all applicable national and local
codes. National and local codes supersede the recommendations,
requirements, and guidelines contained in the manual.
• The purchaser of this equipment is required to prominently post instructions to
be followed should the user smell natural gas. This information shall be
obtained from the local natural gas supplier.
• Installing any part(s) not provided by the Edge oven OEM shall void the warranty
and release the OEM from any and all liabilities.
• Those parts which have been protected by the manufacture or authorized
agents shall not be adjusted by the user.
• The oven electrical wiring diagram is located inside the control compartment.
To Next Page
Loading...
Need help?
General
