Edge EDS500.2FD-E0 - Page 22

Technical Update : EDS3000.1FD-E0 / EDX5000.1FD-E0
Single Amplier Installation
Multi Amplier Installation
The EDGE Monoblock ampliers (EDS3000.1FD-E0 / EDX5000.1FD-E0) have been
updated with audio pass though on the low level inputs (RCA).
This allows the audio signal to be passed from one amplier to another without the
need for RCA Y-splitters.
When using audio pass through, the right input is used for the output to the next
amplier in the chain.
See the below wiring diagrams to see what conguration is appropriate for your
installation.