When recovery is complete your vehicle is at factory stock.
You are now able to start your vehicle normally. You
may now attempt to program your v
ehicle again. In the
event that recovery is unsuccessful or fails to complete the
programming cycle, a status message will display on the
programmer.
30
TROUBLE SHOOTING CONT’D
----------------------------------------------------------------------------
My programmer shows a ‘vehicle calibration not on le’
status.
PThe HT2 is loaded with the latest databases meant to
provide extremely broad vehicle coverage. ‘Vehicle
calibration not on le’ status occurs when programmer does
not have the necessary calibration les to program a vehicle.eh
Update your programmer using the Ignition update software.
If your calibration is available it will be downloaded to your
programmer for immediate use. If your calibration is notat
available, your calibration will be uploaded to Edge Products’
R&D for tuning. You will receive an e-mail as soon as your
calibration is available. Calibrations are usually available in 5
business days.
To Next Page
Loading...
Need help?
General