1. Do not exceed legal speed limits on public roadways. Use any enhanced
speed capabilities of this product only in closed circuit, legally sanctioned racing
environments expressly for this purpose. Loss of control from speeding on a public
road could seriously injure you, your passengers, or others on the roadway.
2. Do not operate the device while driving. Perform all adjustments or changes
while stopped. Changing a setting while under way can interfere with your
attention to roadway conditions.
3. “Stacking” performance-enhancing devices or other improper installation
can cause power train failure on the road. Other products may have features
incompatible with your Edge Products device. Follow all installation and operating
instructions, and do not stack products.
4. Some modications may affect other parts of your vehicle. For example, if
you remove/adjust the speed limiter in your vehicle, be sure your tires and other
components are rated for the increased speeds they will have to withstand. Not
doing so can lead to loss of vehicle control. Modify the speed limiter only for use
in closed circuit, legally sanctioned racing environments, not for use on public
roadways.
CAUTION: Before taking your vehicle into a service center, return your
vehicle to stock. The service center might reprogram your vehicle with an
updated program without your knowledge. If you do not use this device to
return your vehicle to factory stock and your vehicle is reprogrammed by
the service center, the programmer will no longer be able to program your
vehicle.
SAFETY GUIDELINES
Check out the performance chips and programmers we offer.
To Previous Page
Loading...
Need help?
General