EasyManuals Logo

EdgeStar CWR263DZ User Manual

EdgeStar CWR263DZ
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
13
5. Install the lower hinge and bushing on the bottom left support bracket.
6. Carefully insert the door into the upper right corner hinge, then slide the door on top
of the lower hinge and secure the door by installing the lower screws.
Removing and Installing Decorative Plugs
Follow the instructions below to remove the decorative plugs from the door.
1. Open the door and carefully pull the door gasket from the top left corner until you have
exposed the two holes which correspond with the decorative plugs.
2. Insert a Flathead screwdriver through the gasket side of the door into the decorative plug
slot. You may need to use a flashlight to help guide you through this process.
Important: Before you begin, unplug the Cooler.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EdgeStar CWR263DZ and is the answer not in the manual?

EdgeStar CWR263DZ Specifications

General IconGeneral
BrandEdgeStar
ModelCWR263DZ
CategoryKitchen Appliances
LanguageEnglish

Related product manuals