EdgeStar CWR461DZ - Page 20

- 20 -
3. DISASS
EMB
LY
2. Remove the compressor junction box. (figure 101)
Figure 101
3. Dismantle the compressor PTC starter and overload
protector. (figure 102)
Figure 102
4. The compressor PTC starter and overload protector is
like below. (figure 103)
Figure 103
(Models：CWR1101DZ)
1. Loosen one screw. (figure 104)
Figure 104
2. Remove the compressor junction box. (figure 105)
Figure 105
3. Dismantle the compressor PTC starter and overload
protector. (figure 106)
Figure 106