EdgeStar CWR461DZ - Disassembly Procedures; Door Removal Guide

- 8 -
3. DISASS
EMB
LY
3-1 DOOR
(Models：CWR461DZ , CWR262DZ )
Loosen 2 bolts fixing the lower door axis to the lower
hinge to remove the door. (Figure 1)
Low
er Door Axis
Lower Hinge
BOLT
Figure 1
(Models：CWR1101DZ, CWR1551DZ, CWR1551DD,
CWR1431TZ)
Loosen 2 bolts fixing the lower door axis to the lower
hinge to remove the door. (Figure 2)
Figure2
(Models：CWF340DZ)
Loosen 3 bolts fixing the lower hinge to the cabinet to
remove the door. (Figure 3)
Low
er Hinge
BOLT
Figure3
3-2 WOODEN SHELVES
(Models：CWR461DZ , CWR262DZ
CWR1101DZ, CWR1551DZ, CWR1551DD, CWR1431TZ)
 Open the door completely.
 If necessary, make sure you remove all the contents sitting
on the shelf..
 Pull the shelf forward until the notch aligns with the plastic
post on each side of the shelf track.
 Lift the shelf until both notches pass through the posts.
 Continue to pull the shelf forward until it is completely
removed from the inner compartment. (Figure 4)
Figure 4
WIRES SHELVES
(Models：CWF340DZ)
 Open the door completely.
 If necessary, make sure you remove all the contents sitting
on the shelf..
 Pull the shelf forward until the notch aligns with the plastic
post on each side of the shelf track.
 Lift the shelf until both notches pass through the posts.
 Continue to pull the shelf forward until it is completely
removed from the inner compartment. (Figure 5)
Figure 5