Introduction
Thank you for choosing EdgeStar. This guide is a supplement to the EdgeStar Beer
Dispenser Guide for your KC2000TWIN or KC2000SSTWIN EdgeStar Full Size Dual Tap
Kegerator & Draft Beer Dispenser. Please follow the EdgeStar Beer Dispenser Guide for
step-by-step instructions.
You may download the latest guide at <http://www.edgestar.com/support/>
Parts Identification
1. 3” Double Tower and Gasket
2. Singe Gauge Regulator
3. Five Pound CO2 Tank with 1 ¾” threads (Supplied empty)
4. 2 American Sankey Keg Couplers
5. 2 Faucets and 2 Handles
6. 2 Four Feet CO2 Hoses (One hose may be precut)
7. CO2 Manifold
8. Set of Bolts, Washers, Hex Nuts to secure tower
9. 6 Snap Clamps for CO2 Hoses
10. Rail (not pictured)
11. 4 Caster wheels and 2 washers (not pictured)
12. Refrigerator (not pictured)
13. Drip Tray
123456789
All the pictures in this manual are for reference
only. Your unit may be slightly different than the
images depicted. Parts included may be subject
to change.
To Next Page
Loading...
Need help?
General
