EasyManuals Logo

EDIFIER NeoBuds Pro User Manual

EDIFIER NeoBuds Pro
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
FAQs
When charging the charging case, the indicator is off.
Please ensure the charging case is correctly connected with power source.
No sound
Check if the earbuds are operating.
Check if the earbuds volume are at an appropriate level.
Check if the earbuds are correctly connected with mobile phone.
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
Check if mobile phone is in an area with strong signal.
Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile
phone.
When playing music, cannot control pause/play/next track via the earbuds.
Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
The tapping function is too sensitive or not sensitive.
Please ensure you are tapping within the effective area with a moderate intensity or at an appropriate angle.
You can also adjust to a desired tapping sensitivity through the EDIFIER CONNECT APP.
After one earbud alone is connected to another mobile phone, there is no sound from the other earbud
when used again.
When one earbud alone is connected to another mobile phone, the interconnection between the left and right
earbuds may have been disconnected. To restore the two earbuds mode, double click the button on the case to
resume interconnection between the left and right earbuds. Then try again.
There is a delay problem when playing game.
Please triple click the left earbud to switch to game mode and then start playing game.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EDIFIER NeoBuds Pro and is the answer not in the manual?

EDIFIER NeoBuds Pro Specifications

General IconGeneral
Game modeYes
Control typeTouch
Product typeHeadphones
CertificationHi-Res Audio
Product colorBlack
Wearing styleIn-ear
Recommended usageCalls/Music
Protection featuresDust resistant, Water resistant
International Protection (IP) codeIP54
Bluetooth version5.0
Bluetooth profilesAAC, LDAC, LHDC, SBC
Connectivity technologyTrue Wireless Stereo (TWS)
Microphone typeBuilt-in
Battery typeBuilt-in battery
Battery capacity40 mAh
Continuous audio playback time24 h
Battery capacity (charging case)500 mAh
Battery recharge time (charging case)1 h
Quick start guideNo
Charging case typeWired
Charging case connector typeUSB Type-C

Related product manuals